RGBKB Build Guides
  • RGBKB build guides
  • Mün 2
    • Overview
    • Assembly
    • Accessories
  • Phobos
    • Introduction
    • Flashing
    • Assembly - Switchplate
    • Assembly - Plateless
    • Accessories
  • Zygomorph 3 (WIP)
    • Introduction (WIP)
  • Sol 3
    • Introduction
    • Flashing
    • Assembly
    • Accessories
    • Fullhand
  • Mün
    • Introduction
    • Flashing
    • Assembly
  • Zygomorph 2 (EOL)
    • Introduction
  • Pan
    • Introduction
    • Soldering
    • Flashing
    • Assembly
  • Sol 2 build guide
    • Introduction
    • Flashing
    • Assembly
    • Sol Power
    • Default Keymap
  • Zygomorph Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Zen2 Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Archive
    • USB-Fusion
    • Sol 1 Build guide
Powered by GitBook
On this page
  1. Sol 3

Assembly

PreviousFlashingNextAccessories

Last updated 3 years ago

To prevent static shock damage, a strip of ESD foam has been included with your PCB. It's very small, so don't lose it when taking the PCB out of the bag! Cut it into 4 sections and attach to your USB ports as shown below.

PCB Spacers are optional, and need to be used for plateless builds.

If you purchased plate foam, place it into the frame before the switch plate.