> For the complete documentation index, see [llms.txt](https://rgbkb.gitbook.io/rgbkb-build-guides/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://rgbkb.gitbook.io/rgbkb-build-guides/mun-2/accessories.md).

# Accessories

## Tenting feet:

![18 degree configuration](/files/-MVKrLMJdjr0kRpoy_sh)

![10 degree configuration](/files/-MVKrOdGE-DWklpQ2vhk)

## MKi2c modules:

Modules should be installed after the switchplate & switches have been installed onto the PCB. Orient the module so that the springpins contact the pads on top of the PCB. Use the included screws to secure the module to the PCB.

{% hint style="danger" %}
Some OLED modules may have long pins connecting the OLED panel to the carrier board. These pins may contact metal switchplates, and can be cut down with flush cutters.
{% endhint %}