Introduction
A guide to building the Pan keyboard, available at RGBKB. Pictures are coming soon!
The ergo layout on R1.2 boards has an issue with the bottom row, 4th key from the left. Please contact me for a replacement PCB, or use 1.5u keys in that position.
Kit contents:
Middle PCB
Bottom PCB
12x M2.5 8mm standoffs
24x 5mm M2.5 hex low-profile screws
Soldered components including controller and LEDs
Acrylic cover
4x Rubber feet
A plate is required to build Pan! You can buy one or make your own.
Tools Required
Soldering iron, thin tip recommended
Flush/Micro cutters
Solder/Flux
Metric Allen keys
Components Included with the kit
Source
P/N
Description
Qty
Note
Optional Components (Not included in kit)
Source
P/N
Description
Qty
Note
Last updated