RGBKB Build Guides
  • RGBKB build guides
  • Mün 2
    • Overview
    • Assembly
    • Accessories
  • Phobos
    • Introduction
    • Flashing
    • Assembly - Switchplate
    • Assembly - Plateless
    • Accessories
  • Zygomorph 3 (WIP)
    • Introduction (WIP)
  • Sol 3
    • Introduction
    • Flashing
    • Assembly
    • Accessories
    • Fullhand
  • Mün
    • Introduction
    • Flashing
    • Assembly
  • Zygomorph 2 (EOL)
    • Introduction
  • Pan
    • Introduction
    • Soldering
    • Flashing
    • Assembly
  • Sol 2 build guide
    • Introduction
    • Flashing
    • Assembly
    • Sol Power
    • Default Keymap
  • Zygomorph Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Zen2 Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Archive
    • USB-Fusion
    • Sol 1 Build guide
Powered by GitBook
On this page
  1. Mün 2

Overview

PreviousRGBKB build guidesNextAssembly

Last updated 1 year ago

Mün 2 can be mapped with VIAL:

  1. Connect the indicated USB port to the computer for one of the PCBs

  2. A usb drive “RPI-RP2” window should open automatically

    1. If not, hold the BOOT button and tap the RESET button

  3. Drag and drop (or copy & paste) the .uf2 file into the drive

  4. The PCB should automatically reset

  5. Check for LED functionality

  6. Repeat for the other PCB

Mün 2 is fully open source!
https://get.vial.today/
159KB
rgbkb_mun2_rev1_vial.uf2
Updated 4/27/2024