RGBKB Build Guides
  • RGBKB build guides
  • Mün 2
    • Overview
    • Assembly
    • Accessories
  • Phobos
    • Introduction
    • Flashing
    • Assembly - Switchplate
    • Assembly - Plateless
    • Accessories
  • Zygomorph 3 (WIP)
    • Introduction (WIP)
  • Sol 3
    • Introduction
    • Flashing
    • Assembly
    • Accessories
    • Fullhand
  • Mün
    • Introduction
    • Flashing
    • Assembly
  • Zygomorph 2 (EOL)
    • Introduction
  • Pan
    • Introduction
    • Soldering
    • Flashing
    • Assembly
  • Sol 2 build guide
    • Introduction
    • Flashing
    • Assembly
    • Sol Power
    • Default Keymap
  • Zygomorph Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Zen2 Build Guide
    • Introduction
    • Assembly
    • Flashing
  • Archive
    • USB-Fusion
    • Sol 1 Build guide
Powered by GitBook
On this page
  1. Zygomorph 2 (EOL)

Introduction

WIP BUILD GUIDE

Follow Sol 3 flashing instructions, but use qmk compile -kb rgbkb/zygomorph2 -km default

You may need to trim switch pins by ~0.5mm

Primary/Secondary labels are wrong on SW4 for R1.0 boards, use the opposite!

Set slide switches (SW2,SW3,SW4) to choose left/right USB port to the PC, and determine primary/secondary handedness

PreviousAssemblyNextIntroduction

Last updated 4 years ago