# Sol 2 build guide

- [Introduction](/rgbkb-build-guides/sol-build-guide/introduction.md): A guide to building the Sol 2 keyboard, available at RGBKB.
- [Flashing](/rgbkb-build-guides/sol-build-guide/flashing.md): Flash your PCBs and test them before soldering the board together. DIP switch configuration is below.
- [Assembly](/rgbkb-build-guides/sol-build-guide/assembly.md)
- [Sol Power](/rgbkb-build-guides/sol-build-guide/sol-power.md)
- [Default Keymap](/rgbkb-build-guides/sol-build-guide/default-keymap.md): This is the default keymap. The OLED, extra encoders, and fullhand LEDs are disabled by default. LED power is limited to improve compatibility with all USB ports.